CN|EN

Wire Mesh-02

Features:

Five-layer sintered wire mesh is a kind of the most widely used network standard sintered structural. It's layered by strengthening layer, strengthening layer, distributary layer, control layer and protect layer together. The sintered sheet is made by sintered in vacuum, and rolling process. It's with high strength, steady filter rating, good perforation, easy cleaning, easy molding and other advantages to filter unparlleled.

PARAMETER

Five-layer sintered wire mesh
Five-layer sintered wire mesh is a kind of the most widely used network standard sintered structural. It's layered by strengthening layer, strengthening layer, distributary layer, control layer and protect layer together. The sintered sheet is made by sintered in vacuum, and rolling process. It's with high strength, steady filter rating, good perforation, easy cleaning, easy molding and other advantages to filter unparlleled.
We can manufacture the sintered wire mesh according to the customer's require or sample, and we can make the max size 650x1200mm and the rating is from 0.5 to 200 micron.
Features
High Intensity: Layer 4 and layer 5 use 12x64 Twill network, has good pressure and intensity.
Corrosion-resistant: The five-layer sintering materials made from 316L are very good corrosion resistance and acid resistance.
Heat resistance: can withstand 500℃ high temperatures.
Easy to clean: easy cleaning and backwashing.
Easy molding: 316L guarantee the material sintered plate with tension network.
High flow rate in unit: surface filtration, unit area, traffic flow.
High precision: control layer in the second layer, uniforming porosity can ensure the rating.

Main Technical Parameters


NEWSLETTER